Quick Links: Account | Register / Sign In | View Basket
M12 x 50mm Round CSK Square BZP Bolt (2 x bolts provide fixing for 1 x Sacrificial Wing).
(Part no. L88115HT)
M12 Nyloc Nut BZP (fixing to suit 35mm and 50mm bolts used for Tungsten Carbide and Sacrificial wings).
(Part no. L81110)
NG System Upper/Middle shin for use with Plowman Omni-Til and Omni-Lift and other cultivation systems.
Typically used in Option 2 configuration (middle shin only, low-medium draft with increased protection to Option 1) and Option 3 (upper shin only, medium-high draft with high protection).
(Part No. CU_NGSHIN2TPDTC)
Related Parts
30mm Roll Pin (L98211)
M14 x 30 Spring Tension (Sellok) Pin. Suitable for use with SHIN2 HD and SHIN2 HDTC leg proctection and both 4mm and 6mm NG P...
Designed to be used with the Plowman Omni-Til, the 30mm shear bars are individually machined by us to fit the cultivator perfectly and protect against damage to the legs that can be a particular problem in stony soil.
(part no: CUL_SHEARBAR-01)
M14 x 30 Spring Tension (Sellok) Pin. Suitable for use with SHIN2 HD and SHIN2 HDTC leg proctection and both 4mm and 6mm NG Points.
(Part no. L98211)
Related parts:
SHIN2 HD (CU_NGSHIN2HD)
SHIN2 HDTC (CU_NGSHIN2HDTC)
4mm Point (CU_NGPOINTTC)
6mm Point (CU_NGPOINTHDTC)
Point for NG system (6mm) tipped with tungsten carbide for extra protection.
(Part no. CU_NGPOINTHDTC)
M14 x 30 Spring Tension (Sellok) Pin. Suitable for use with SHIN2 HD and SHIN2 HDTC leg proctection and both 4mm and 6mm NG P...
Point for NG system (4mm) tipped with tungsten carbide for extra protection.
(Part no. CU_NGPOINTTC)
M14 x 30 Spring Tension (Sellok) Pin. Suitable for use with SHIN2 HD and SHIN2 HDTC leg proctection and both 4mm and 6mm NG P...
NG System lower shin for use with Plowman Omni-Til and Omni-Lift.
Typically used in Options 2, 3 and 4 configurations for increased protection for deeper working depths.
(Part no. CU_NGSHIN1HDTC)
NG System lower shin for use with Plowman Omni-Til and Omni-Lift.
Usually used in Option 1 configuration for low draft and minimal soil disturbance.
(Part no. CU_NGSHIN1TC)
NG System upper/middle shin for use with Plowman Omni-Til and Omni-Lift as well as other cultivation machinery.
Typical configurations used with this shin would be Option 1 (upper and middle shins - lowest possible draft) and Option 2 (Upper shin only - low draft with increased protection) .
(Part no. CU_NGSHIN2TC)
Related Parts
26mm Roll Pin (L98210)
If you have any questions please feel free to call on 01904 768 230
or email us at info@plowmanbrothers.co.uk
