Wearing metal, shear pins, subsoiler parts
Plowman Agriculture components
-
30mm Roll Pin
£0.90M14 x 30 Spring Tension (Sellok) Pin. Suitable for use with SHIN2 HD and SHIN2 HDTC leg proctection and both 4mm and 6mm NG P...
-
50mm Bolt
£0.53M12 x 50mm Round CSK Square BZP Bolt (2 x bolts provide fixing for 1 x Sacrificial Wing). (Part no. L88115HT)...
-
M12 Nyloc Nut
£0.23M12 Nyloc Nut BZP (fixing to suit 35mm and 50mm bolts used for Tungsten Carbide and Sacrificial wings). (Part n...
-
NG Leg TC
£93.94Cast weld on half leg to suit NG system used on Plowman Omni-Til cultivation system and Omni-Lift subsoiler.
-
NG Point TC (4mm)
£63.61Point for NG system (4mm) tipped with tungsten carbide for extra protection. (Part no. CU_NGPOINTTC)
-
NG Point TC (6mm)
£66.74Point for NG system (6mm) tipped with tungsten carbide for extra protection. (Part no. CU_NGPOINTHDTC)
-
NG Wing (Tungsten Carbide)
Configure for priceNG system wings tipped with tungsten carbide for extra protection. For use with Plowman Omni-Til and Omni-Lift and other cult...
-
Sacrificial Wing
Configure for price250mm Sacrificial Wing for use with NG Leg system. (Part no. CU_NGWINGSAC250) Related Parts: M12 x 50mm ...
-
Shear Bar
£16.13Designed to be used with the Plowman Omni-Til, the 30mm shear bars are individually machined by us to fit the cultivator pe...
-
Shin1
£49.50NG System lower shin for use with Plowman Omni-Til and Omni-Lift. Usually used in Option 1 configuration for low draft an...
-
Shin1 HD
£58.72NG System lower shin for use with Plowman Omni-Til and Omni-Lift. Typically used in Options 2, 3 and 4 configurations for ...
-
Shin2
£28.08NG System upper/middle shin for use with Plowman Omni-Til and Omni-Lift as well as other cultivation machinery. Typical co...
-
Shin2 HD
£54.66NG System Upper/Middle shin for use with Plowman Omni-Til and Omni-Lift and other cultivation systems. Typical configurati...
-
Shin2 TPD
£54.59NG System Upper/Middle shin for use with Plowman Omni-Til and Omni-Lift and other cultivation systems. Typically used in ...